| A Desiccant Dehumidification system consists of a desiccant wheel which rotates through a supply and regeneration air stream. In the supply air side the desiccant wheel removes moisture from the air stream by absorption. As it rotates into the regeneration air stream it is subjected to hot air. This hot air absorbs the moisture picked up on the supply side and exhausts it to atmosphere. We can utilize resistance electrical heaters, Direct or Indirect fired Natural Gas, or Steam as the regeneration heat medium. |  |
 | Unfortunately all the heat from the regeneration side of the process does not get exhausted to atmosphere. As the hot desiccant media rotates into the supply side air stream unwanted heat is put into that air stream. Depending on the application a post-cooling refrigeration coil may be required. |
| Depending on the humidity levels and the quantity of outside air required the use of a refrigeration pre-cooling coil may be required. The purpose of this coil is to remove as much moisture as possible before the desiccant dehumidifier.
These systems can be built into your ESC Air Handling Unit, or we can provide Pre Conditioning of Air and Post Conditioning of Air to Package Desiccant Dehumidification units. |  |